Jump to content

Bypass the Blur. Methods inside!


R A T E D.

Recommended Posts

Credits all go to jweb1331, Tich and Thr33X and all the other users who took part in figuring this out.
Main thread: http://caws.ws/forum/topic/391260-figured-out-the-crotch-blur/

Methods:
[spoiler]How To Put One Logo On...
http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled29.jpg

1) Select a hand, arm/wrist or sock layer that can have a logo placed onto it.

2) Select your desired Underwear in it's layer and color it to your preference.

3) Go to Logos, choose PT and select any HIGH RES logo. You'll need to have 2 HR logos saved and ready to be used here. I just filled two separates with color. Place it anywhere.

4) Select the second HR logo and place it. Continue out as if you were done with this area of your CAW.

5) Go to Edit layers. In the Edit list you'll notice the hand/arm layer is in the the Underwear category now. DON'T TOUCH IT. Go back in and edit the 1st PT layer you added and choose whichever logo you actually want to put on. Keep in mind you have to swap res, so if your desired PT was Hi-Res, you'd do steps 3 & 4 with Lo-Res logos instead. The game will prompt you that you'll delete all previously used PT logos due to the switch. Select yes.

6) Now place your logo wherever you wanted it to go. When you move it over the blur areas, it'll still be blurred, but when you place/finalize it, your PT will be plastered on completely blur free.

http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled30.jpg
----------------------------------

How To Put More On...
1) After you've place your logo, go back to Edit Layers and go back to your PT logo. Select another logo of the same resolution so it swaps with the original, but don't confirm it. Go back out so the original shows again, then select the other logo again so it adds on as it's own layer. Confirm.

2) Go to Remove Layer. The PT you just added will be on top by itself. Dele-ete.

3) Now go back to Edit Layers and go back to the PT you originally unblurred again and repeat step 1. This time, choose what other PT you want to add to the CAW and size/place it to your liking. You'll notice that this logo is now automatically unblurred as well. Assuming one's going in the front and on in the back, you now have blurrless PT logos on your CAWS attire. Win.

*For added flavor, you can use this to completely cover your CAWS legs with a full size PT logo, creating custom tights. It's not just for the short tights this can be used on, folks. Go crazy with it. This trick can be done for male and female bottoms. For female tops, see below.

http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled28.jpg

Now For The Boob Blur...
*Before anything, bear in mind that you can't use the crotch and boob blur simultaneously for females. In fact, if you do the trick and then try to add a PT logo to the underwear bottoms after glitching the top, your game will freeze. This applies to the PS3 version, the 360 version can be hacked to pull it off.

1) Select your hand/wrist layer. Go to move layers and place that layer UNDER the layer you want to put your logos on. So if it's a top, put it under the top, if it's bottoms, same story. You layer list should look like:
[quote]
1) Bikini part you want your PT on
2) Arm/Wrist or Hand layer
3) Bikini part you don't want your PT on[/quote]
2) Follow steps 3-6 as listed above for the Crotch Blur. For multiple PTs, follow the second instruction list as described as well.

[/spoiler]Credit to Thr33X for that step by step method.
Happy CAW Making with the ability to create full attires!

* Once again, if you're on the PS3 you will not be able to add unblurred PT logos to both top and bottom. If you try it, you'll only delete all your PT logos from the CAW when you switch resolutions trying to add one to the bottoms when you have one on the top or vice versa, or freeze your game...so don't be greedy.[/spoiler]Credit to Thr33X for that step by step method.
Enjoy.
Link to comment
Share on other sites

man... quite gutted you cant get this to work on actual pants... would work wonders for caws like Gen Me (who im in the stages at attempting now).
Well i tried to make it work on pants and i couldnt. If anyone else figures it out or whatever then i guess that would make me wrong :blush:
Link to comment
Share on other sites

[quote name='Grizzly_Shark' timestamp='1290765883' post='7758745']
man... quite gutted you cant get this to work on actual pants... would work wonders for caws like Gen Me (who im in the stages at attempting now).
Well i tried to make it work on pants and i couldnt. If anyone else figures it out or whatever then i guess that would make me wrong :blush:
[/quote]
First post on this page http://caws.ws/forum/topic/391260-figured-out-the-crotch-blur/page__st__120 might help you. Even tho the method is for tights it might work for pants. Tho remember the pants have to be able to have paint tool designs on them.
Link to comment
Share on other sites

[quote name='the_Chunk' timestamp='1291075498' post='7764921']
[quote name='R A T E D.' timestamp='1291068089' post='7764670']
[quote name='the_Chunk' timestamp='1291044953' post='7764148']
can we get this pinned by a mod?
[/quote]
This. Please
[/quote]
i second Rated's "This.Please"
[/quote]
I Third this.
Link to comment
Share on other sites

[quote name='R A T E D.' timestamp='1290636193' post='7756108']
All credit to jweb1331, Tich and Thr33X and all the other users who took part.
Here > [url="http://caws.ws/forum/topic/391260-figured-out-the-crotch-blur/"]http://caws.ws/forum...he-crotch-blur/[/url]
is were you will find out how to bypass the crotch blur,ass blur,boob blur. Here is the methods from that topic.
[spoiler]How To Put One Logo On...
[url="http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled29.jpg"]http://i419.photobuc.../Untitled29.jpg[/url]

1) Select a hand, arm/wrist or sock layer that can have a logo placed onto it.

2) Select your desired Underwear in it's layer and color it to your preference.

3) Go to Logos, choose PT and select any HIGH RES logo. You'll need to have 2 HR logos saved and ready to be used here. I just filled two separates with color. Place it anywhere.

4) Select the second HR logo and place it. Continue out as if you were done with this area of your CAW.

5) Go to Edit layers. In the Edit list you'll notice the hand/arm layer is in the the Underwear category now. DON'T TOUCH IT. Go back in and edit the 1st PT layer you added and choose whichever logo you actually want to put on. Keep in mind you have to swap res, so if your desired PT was Hi-Res, you'd do steps 3 & 4 with Lo-Res logos instead. The game will prompt you that you'll delete all previously used PT logos due to the switch. Select yes.

6) Now place your logo wherever you wanted it to go. When you move it over the blur areas, it'll still be blurred, but when you place/finalize it, your PT will be plastered on completely blur free.

[url="http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled30.jpg"]http://i419.photobuc.../Untitled30.jpg[/url]
----------------------------------

How To Put More On...
1) After you've place your logo, go back to Edit Layers and go back to your PT logo. Select another logo of the same resolution so it swaps with the original, but don't confirm it. Go back out so the original shows again, then select the other logo again so it adds on as it's own layer. Confirm.

2) Go to Remove Layer. The PT you just added will be on top by itself. Dele-ete.

3) Now go back to Edit Layers and go back to the PT you originally unblurred again and repeat step 1. This time, choose what other PT you want to add to the CAW and size/place it to your liking. You'll notice that this logo is now automatically unblurred as well. Assuming one's going in the front and on in the back, you now have blurrless PT logos on your CAWS attire. Win.

*For added flavor, you can use this to completely cover your CAWS legs with a full size PT logo, creating custom tights. It's not just for the short tights this can be used on, folks. Go crazy with it. This trick can be done for male and female bottoms. For female tops, see below.

[url="http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled28.jpg"]http://i419.photobuc.../Untitled28.jpg[/url]

Now For The Boob Blur...
*Before anything, bear in mind that you can't use the crotch and boob blur simultaneously for females. In fact, if you do the trick and then try to add a PT logo to the underwear bottoms after glitching the top, your game will freeze. This applies to the PS3 version, the 360 version can be hacked to pull it off.

1) Select your hand/wrist layer. Go to move layers and place that layer UNDER the layer you want to put your logos on. So if it's a top, put it under the top, if it's bottoms, same story. You layer list should look like:
[quote]
1) Bikini part you want your PT on
2) Arm/Wrist or Hand layer
3) Bikini part you don't want your PT on[/quote]
2) Follow steps 3-6 as listed above for the Crotch Blur. For multiple PTs, follow the second instruction list as described as well.

* Once again, if you're on the PS3 you will not be able to add unblurred PT logos to both top and bottom. If you try it, you'll only delete all your PT logos from the CAW when you switch resolutions trying to add one to the bottoms when you have one on the top or vice versa, or freeze your game...so don't be greedy.[/spoiler]Credit to Thr33X for that step by step method.
Enjoy.
[/quote]

Why dont you put a picture up to show us. Cause I dont understand
Link to comment
Share on other sites

[quote name='Vintage_.-pain' timestamp='1291421134' post='7772639']
[quote name='R A T E D.' timestamp='1290636193' post='7756108']
All credit to jweb1331, Tich and Thr33X and all the other users who took part.
Here > [url="http://caws.ws/forum/topic/391260-figured-out-the-crotch-blur/"]http://caws.ws/forum...he-crotch-blur/[/url]
is were you will find out how to bypass the crotch blur,ass blur,boob blur. Here is the methods from that topic.
[spoiler]How To Put One Logo On...
[url="http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled29.jpg"]http://i419.photobuc.../Untitled29.jpg[/url]

1) Select a hand, arm/wrist or sock layer that can have a logo placed onto it.

2) Select your desired Underwear in it's layer and color it to your preference.

3) Go to Logos, choose PT and select any HIGH RES logo. You'll need to have 2 HR logos saved and ready to be used here. I just filled two separates with color. Place it anywhere.

4) Select the second HR logo and place it. Continue out as if you were done with this area of your CAW.

5) Go to Edit layers. In the Edit list you'll notice the hand/arm layer is in the the Underwear category now. DON'T TOUCH IT. Go back in and edit the 1st PT layer you added and choose whichever logo you actually want to put on. Keep in mind you have to swap res, so if your desired PT was Hi-Res, you'd do steps 3 & 4 with Lo-Res logos instead. The game will prompt you that you'll delete all previously used PT logos due to the switch. Select yes.

6) Now place your logo wherever you wanted it to go. When you move it over the blur areas, it'll still be blurred, but when you place/finalize it, your PT will be plastered on completely blur free.

[url="http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled30.jpg"]http://i419.photobuc.../Untitled30.jpg[/url]
----------------------------------

How To Put More On...
1) After you've place your logo, go back to Edit Layers and go back to your PT logo. Select another logo of the same resolution so it swaps with the original, but don't confirm it. Go back out so the original shows again, then select the other logo again so it adds on as it's own layer. Confirm.

2) Go to Remove Layer. The PT you just added will be on top by itself. Dele-ete.

3) Now go back to Edit Layers and go back to the PT you originally unblurred again and repeat step 1. This time, choose what other PT you want to add to the CAW and size/place it to your liking. You'll notice that this logo is now automatically unblurred as well. Assuming one's going in the front and on in the back, you now have blurrless PT logos on your CAWS attire. Win.

*For added flavor, you can use this to completely cover your CAWS legs with a full size PT logo, creating custom tights. It's not just for the short tights this can be used on, folks. Go crazy with it. This trick can be done for male and female bottoms. For female tops, see below.

[url="http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled28.jpg"]http://i419.photobuc.../Untitled28.jpg[/url]

Now For The Boob Blur...
*Before anything, bear in mind that you can't use the crotch and boob blur simultaneously for females. In fact, if you do the trick and then try to add a PT logo to the underwear bottoms after glitching the top, your game will freeze. This applies to the PS3 version, the 360 version can be hacked to pull it off.

1) Select your hand/wrist layer. Go to move layers and place that layer UNDER the layer you want to put your logos on. So if it's a top, put it under the top, if it's bottoms, same story. You layer list should look like:
[quote]
1) Bikini part you want your PT on
2) Arm/Wrist or Hand layer
3) Bikini part you don't want your PT on[/quote]
2) Follow steps 3-6 as listed above for the Crotch Blur. For multiple PTs, follow the second instruction list as described as well.

* Once again, if you're on the PS3 you will not be able to add unblurred PT logos to both top and bottom. If you try it, you'll only delete all your PT logos from the CAW when you switch resolutions trying to add one to the bottoms when you have one on the top or vice versa, or freeze your game...so don't be greedy.[/spoiler]Credit to Thr33X for that step by step method.
Enjoy.
[/quote]

Why dont you put a picture up to show us. Cause I dont understand
[/quote]
Click on the picture links to see them.
Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...
I have a question about this. I just tried this out and got it to work on a womans underwear top. My question is...When using this glitch are there any uploading problems? And I mean anything from me not being able to upload it, all the way to if someone downloads my CAW with the glitch on it, can they still use it online? Please respond if you happen to know the answer to this. I'd hate to get used to using this and find out that people can't use my CAWs the way they want to. I'd rather do it the old way if this causes problems.
Link to comment
Share on other sites

  • 6 months later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...