Jump to content

Bypass the Blur. Methods inside!

R A T E D.

By R A T E D.
in XBox 360

Recommended Posts

R A T E D. Hall of Famer

R A T E D.

Posted
Posted
Credits all go to jweb1331, Tich and Thr33X and all the other users who took part in figuring this out.
Main thread: http://caws.ws/forum/topic/391260-figured-out-the-crotch-blur/

Methods:
[spoiler]How To Put One Logo On...
http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled29.jpg

1) Select a hand, arm/wrist or sock layer that can have a logo placed onto it.

2) Select your desired Underwear in it's layer and color it to your preference.

3) Go to Logos, choose PT and select any HIGH RES logo. You'll need to have 2 HR logos saved and ready to be used here. I just filled two separates with color. Place it anywhere.

4) Select the second HR logo and place it. Continue out as if you were done with this area of your CAW.

5) Go to Edit layers. In the Edit list you'll notice the hand/arm layer is in the the Underwear category now. DON'T TOUCH IT. Go back in and edit the 1st PT layer you added and choose whichever logo you actually want to put on. Keep in mind you have to swap res, so if your desired PT was Hi-Res, you'd do steps 3 & 4 with Lo-Res logos instead. The game will prompt you that you'll delete all previously used PT logos due to the switch. Select yes.

6) Now place your logo wherever you wanted it to go. When you move it over the blur areas, it'll still be blurred, but when you place/finalize it, your PT will be plastered on completely blur free.

http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled30.jpg
----------------------------------

How To Put More On...
1) After you've place your logo, go back to Edit Layers and go back to your PT logo. Select another logo of the same resolution so it swaps with the original, but don't confirm it. Go back out so the original shows again, then select the other logo again so it adds on as it's own layer. Confirm.

2) Go to Remove Layer. The PT you just added will be on top by itself. Dele-ete.

3) Now go back to Edit Layers and go back to the PT you originally unblurred again and repeat step 1. This time, choose what other PT you want to add to the CAW and size/place it to your liking. You'll notice that this logo is now automatically unblurred as well. Assuming one's going in the front and on in the back, you now have blurrless PT logos on your CAWS attire. Win.

*For added flavor, you can use this to completely cover your CAWS legs with a full size PT logo, creating custom tights. It's not just for the short tights this can be used on, folks. Go crazy with it. This trick can be done for male and female bottoms. For female tops, see below.

http://i419.photobucket.com/albums/pp278/Thr33X3/Untitled28.jpg

Now For The Boob Blur...
*Before anything, bear in mind that you can't use the crotch and boob blur simultaneously for females. In fact, if you do the trick and then try to add a PT logo to the underwear bottoms after glitching the top, your game will freeze. This applies to the PS3 version, the 360 version can be hacked to pull it off.

1) Select your hand/wrist layer. Go to move layers and place that layer UNDER the layer you want to put your logos on. So if it's a top, put it under the top, if it's bottoms, same story. You layer list should look like:
[quote]
1) Bikini part you want your PT on
2) Arm/Wrist or Hand layer
3) Bikini part you don't want your PT on[/quote]
2) Follow steps 3-6 as listed above for the Crotch Blur. For multiple PTs, follow the second instruction list as described as well.

[/spoiler]Credit to Thr33X for that step by step method.
Happy CAW Making with the ability to create full attires!
Link to comment
Share on other sites
16BitJay Midcard

16BitJay

Posted
Posted
[quote name='Articulate Virtue' timestamp='1290636763' post='7756135']
This only works for PT's? Not ingame logos or designs?
[/quote]

If you place them on the trunks before the glitch then they will bypass the blur also, and I could also move them :cool:

Edit: You can also delete the PT afterward if you just want the in-game designs on.
Link to comment
Share on other sites
LegitATTIRES Midcard

LegitATTIRES

Posted
Posted
I found the video for it on youtube

ive done it with the hi-res pics, now how do u do it with the low res pics

[quote name='daveAWESOMEone' timestamp='1290720666' post='7757751']
I found the video for it on youtube

ive done it with the hi-res pics, now how do u do it with the low res pics
[/quote]

oh never mind i got it, i just reverse the high res part
Link to comment
Share on other sites
  • 2 weeks later...
TNA_Equalizer Jobber

TNA_Equalizer

Posted
Posted
Got this to work once for multiple logos, but I haven't been able to get it to work again. I can get the 1st one unblurred, but when I do the final step my 2nd logo becomes invisible. I guess it's better than none, but bah... I was happy to get it work the one time.

Update: Figured out what was happening, w00t.
Link to comment
Share on other sites
R A T E D. Hall of Famer

R A T E D.

Posted
  • Author
Posted
First add wristbands that can have paint tool on them then all you need to do is have 3 paint tool logos. Have 2, 256x256 or 128x128 and another the opposite of the two. Now put the two either 256x256 or 128x128 on the crotch blur and then edit the first one and add the opposite size of the two you just applied.

i may be wrong because i am tired as hell so.. if i am just read the instructions on the OP carefully.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...